Items where Subject is "Engineering"

Article

Abbas, Ahmed S. and El-Sehiemy, Ragab A. and Abou El-Ela, Adel and Ali, Eman Salah and Mahmoud, Karar and Lehtonen, Matti and Darwish, Mohamed M. F. (2021) Optimal Harmonic Mitigation in Distribution Systems with Inverter Based Distributed Generation. Applied Sciences, 11 (2). p. 774. ISSN 2076-3417

Adefuye, Olusegun A. and Raji, Nurudeen A. and Kuku, Rafiu O. and Oyetade, Timothy and Ola-Gbadamosi, Ridwan O. (2021) Evaluating the Structural Integrity of Fibreglass for the Manufacture of Headgears. Modern Mechanical Engineering, 11 (02). pp. 13-26. ISSN 2164-0165

Ajah, Chinedu and Ainerua, Emmanuela O. and Oboh, Innocent O. (2023) Mathematical Modelling and the Effect of Blanching on the Drying Kinetics of White Yam (Dioscorea rotundata). Journal of Engineering Research and Reports, 25 (5). pp. 113-121. ISSN 2582-2926

Alobaidi, Wissam M. and Sandgren, Eric (2021) An Interactive Evolutionary Environment for Creative Design. Modern Mechanical Engineering, 11 (02). pp. 27-51. ISSN 2164-0165

Apedanou, Gagnon Koffi and N’wuitcha, Kokou and Lare, Yendoubé and Napo, Kossi (2022) Numerical Study of Mixed Convection in an Isosceles Trapezoidal Cavity with Several Outlets: Application for Primary Air Draft in ASUTO Charcoal Stove. Modern Mechanical Engineering, 12 (02). pp. 45-61. ISSN 2164-0165

Bacquian, Bryan Christian S. and Gomez, Frederick Ray I. (2019) A Study of Wafer Backgrinding Tape Selection for SOI Wafers. Journal of Engineering Research and Reports, 6 (2). pp. 1-6. ISSN 2582-2926

Batsch, Felix and Daneshkhah, Alireza and Palade, Vasile and Cheah, Madeline (2021) Scenario Optimisation and Sensitivity Analysis for Safe Automated Driving Using Gaussian Processes. Applied Sciences, 11 (2). p. 775. ISSN 2076-3417

Bouskela, Adrien and Kling, Alexandre and Schuler, Tristan and Shkarayev, Sergey and Kalita, Himangshu and Thangavelautham, Jekan (2022) Mars Exploration Using Sailplanes. Aerospace, 9 (6). p. 306. ISSN 2226-4310

Cao, Z. and White, C. and Agir, M. B. and Kontis, K. (2023) Lunar plume-surface interactions using rarefiedMultiphaseFoam. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Chen, Liping and Bian, Shihai and Niu, Xiaokai and Zhao, Yongbo and De Jesus, Abílio (2021) Investigation of Lade-Kim Plastic Potential Applicability under Various Stress Paths for Rockfill Materials. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Chiu, Yi-Chung and Chang, Loren C. and Chao, Chi-Kuang and Tai, Tzu-Ya and Cheng, Kai-Lun and Liu, Hsin-Tzu and Tsai-Lin, Rong and Liao, Chi-Ting and Luo, Wei-Hao and Chiu, Guan-Po and Hou, Kai-Jie and Wang, Ruo-Yu and Gacal, Glenn Franco and Lin, Pin-An and Denduonghatai, Sittinat and Yu, Tsai-Ru and Liu, Jann-Yenq and Chandran, Amal and Athreyas, Kashyapa Bramha Naren and Hari, Priyadarshan and Varghese, Joji John and Meftah, Mustapha (2022) Lessons Learned from IDEASSat: Design, Testing, on Orbit Operations, and Anomaly Analysis of a First University CubeSat Intended for Ionospheric Science. Aerospace, 9 (2). p. 110. ISSN 2226-4310

Chunhua, Sun and Guangqing, Shang (2020) Application and Development of 3D Printing in Medical Field. Modern Mechanical Engineering, 10 (03). pp. 25-33. ISSN 2164-0165

Daniel, Ezeliora, Chukwuemeka and Chukwuma, Okoye, Peter and Ikenna, U. Mbabuike, (2019) Prediction and Optimization of Production Quantities in Innoson Manufacturing Extraction Plastic Product. Journal of Engineering Research and Reports, 6 (2). pp. 1-11. ISSN 2582-2926

De Martin, Andrea and Jacazio, Giovanni and Sorli, Massimo (2022) Simulation of Runway Irregularities in a Novel Test Rig for Fully Electrical Landing Gear Systems. Aerospace, 9 (2). p. 114. ISSN 2226-4310

Dehghani, Mohammad and Trojovský, Pavel (2023) Osprey optimization algorithm: A new bio-inspired metaheuristic algorithm for solving engineering optimization problems. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Diene, Alassane and Lamine Lo, Mamadou and Sene, Abdoulaye and Fame, Ablaye and Traore, Youssou and Faye, Seydou and Diagne, Issa and Babacar Ndiaye, Mamadou and Sissoko, Gregoire (2021) Influence of Heat Exchange Coefficients on Both Optimized Thermal Contact (OTCR) and Critical (CTCR) Resistances at the Contact Interface of a Flat Concrete Slab and a Rice Straw Board. Energy and Power Engineering, 13 (12). pp. 392-402. ISSN 1949-243X

Dimaratos, Athanasios and Toumasatos, Zisimos and Doulgeris, Stylianos and Triantafyllopoulos, Georgios and Kontses, Anastasios and Samaras, Zissis (2019) Assessment of CO2 and NOx Emissions of One Diesel and One Bi-Fuel Gasoline/CNG Euro 6 Vehicles During Real-World Driving and Laboratory Testing. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Domínguez, José A. and Jiménez, Luis F. and Álvarez-Muñoz, Jade (2019) Influence of Mixing Time on Fresh and Hardened Cast-in-place Concrete. Journal of Engineering Research and Reports, 6 (2). pp. 1-6. ISSN 2582-2926

Dudoit, Anrieta and Rimša, Vytautas and Bogdevičius, Marijonas and Skorupski, Jacek (2022) Effectiveness of Conflict Resolution Methods in Air Traffic Management. Aerospace, 9 (2). p. 112. ISSN 2226-4310

Dyniewicz, Bartlomiej and Bajer, Czeslaw I. (2012) New Consistent Numerical Modelling of a Travelling Accelerating Concentrated Mass. World Journal of Mechanics, 02 (06). pp. 281-287. ISSN 2160-049X

Fang, Xiurong and Liu, Liu and Lu, Jia and Gao, Yang and Samuel, F.H. (2021) Optimization of Forging Process Parameters and Prediction Model of Residual Stress of Ti-6Al-4V Alloy. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Fousseyni Toure, Amadou and Tchoffa, David and El Mhamedi, Abderrahman and Diourte, Badie and Lamolle, Myriam (2021) Modeling and Control Maximum Power Point Tracking of an Autonomous Photovoltaic System Using Artificial Intelligence. Energy and Power Engineering, 13 (12). pp. 428-447. ISSN 1949-243X

Francisco, Casanova-del-Angel and Alejandra, Córdova-Castillo (2022) Finite Element Structural Analysis of Buried Pipelines. Modern Mechanical Engineering, 12 (02). pp. 27-44. ISSN 2164-0165

Han, Lirong and Li, Lei and Jiang, Song (2021) Sustainable Development of Tourism under the Background of Low-Carbon and Green Economy. Advances in Materials Science and Engineering, 2021. pp. 1-8. ISSN 1687-8434

Hidalgo, Samantha and Soriano, Lourdes and Monzó, José and Payá, Jordi and Font, Alba and Borrachero, Mª Victoria (2021) Evaluation of Rice Straw Ash as a Pozzolanic Addition in Cementitious Mixtures. Applied Sciences, 11 (2). p. 773. ISSN 2076-3417

Iemma, Umberto and Centracchio, Francesco (2022) Sound-Quality-Based Decision Making in Multiobjective Optimisation of Operations for Sustainable Airport Scenarios. Aerospace, 9 (6). p. 310. ISSN 2226-4310

Ifeoma, Orakwue, Stella and Praise, Onu, Igochi (2023) A Circular-Shaped Antenna Array for Wide-Band Millimeter-Wave Application. Journal of Engineering Research and Reports, 24 (11). pp. 27-34. ISSN 2582-2926

Jiménez-Escalona, José Carlos and Poom-Medina, José Luis and Roberge, Julie and Aparicio-García, Ramon S. and Avila-Razo, José Eduardo and Huerta-Chavez, Oliver Marcel and Da Silva, Rodrigo Florencio (2022) Recognition of the Airspace Affected by the Presence of Volcanic Ash from Popocatepetl Volcano Using Historical Satellite Images. Aerospace, 9 (6). p. 308. ISSN 2226-4310

Jin, Ouliang (2021) Experimental Verification for the Application Feasibility of Buckingham Pi Theorem in Designing a Scaled Model of Flagellated Swimmer with Traditional Resistive Force Theory. Modern Mechanical Engineering, 11 (03). pp. 53-72. ISSN 2164-0165

Jingyuan, Zheng (2020) Millimeter-Scale Liquid Droplet Migration on Solid Surface with Temperature Gradient: A Simulation Investigation. Modern Mechanical Engineering, 10 (03). pp. 34-38. ISSN 2164-0165

Kanellopoulou, Irene A. and Kartsonakis, Ioannis A. and Charitidis, Costas A. (2021) The Effect of Superabsorbent Polymers on the Microstructure and Self-Healing Properties of Cementitious-Based Composite Materials. Applied Sciences, 11 (2). p. 700. ISSN 2076-3417

Karthik, Rao M. C. and Malghan, Rashmi L. and Kara, Fuat and Shettigar, Arunkumar and Rao, Shrikantha S. and Herbert, Mervin A. and Lusquiños, Fernando (2021) Influence of Support Vector Regression (SVR) on Cryogenic Face Milling. Advances in Materials Science and Engineering, 2021. pp. 1-18. ISSN 1687-8434

Khalil, Ethar and Youssef, Hiba and Nazha, Hasan (2019) A Numerical Study of the Induced Stresses in the Separation Points of the Tensile Element (Chain) of the Plate Conveyor Used in the Blowing Unit in Water Factories. Journal of Engineering Research and Reports, 6 (2). pp. 1-9. ISSN 2582-2926

Kurzyna, Marcin and Kwapiński, Tomasz (2021) Electron Pumping and Spectral Density Dynamics in Energy-Gapped Topological Chains. Applied Sciences, 11 (2). p. 772. ISSN 2076-3417

Lare, Yendoubé and Sambiani, Kanlanféi and Amega, Kokou and Kabe, Moyème (2021) Modeling of the Global Daily Horizontal Solar Radiation Data over Togo. Energy and Power Engineering, 13 (12). pp. 403-412. ISSN 1949-243X

Lee, Chia-Fang and Chen, Chin-Wen and Rwei, Syang-Peng and Chuang, Fu-Sheng (2021) Thermal Behavior and Morphology of Thermoplastic Polyurethane Derived from Different Chain Extenders of 1,3- and 1,4-Butanediol. Applied Sciences, 11 (2). p. 698. ISSN 2076-3417

Llasag Rosero, Raúl and Silva, Catarina and Ribeiro, Bernardete (2022) Remaining Useful Life Estimation of Cooling Units via Time-Frequency Health Indicators with Machine Learning. Aerospace, 9 (6). p. 309. ISSN 2226-4310

Lv, Hongqing and Liu, Shan and Chen, Jiahao and Li, Baoli (2022) Study on the Characteristics of Boundary Layer Flow under the Influence of Surface Microstructure. Aerospace, 9 (6). p. 307. ISSN 2226-4310

Lv, Xiangfeng and Yang, Yahan and Chen, Yan and Wang, Nianjin and Yang, Min and Shao, Ying and Li, Jiaxing and Akhavan, Hamed (2021) Experimental Study on the Relationship between Compression Stability and Deformation Localization of Viscous/Brittle Rock-Like Materials. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Mahbaz, Seyed Bijan and Yaghoubi, Ali and Dehghani-Sanij, Alireza and Sarvaramini, Erfan and Leonenko, Yuri and Dusseault, Maurice B. (2021) Well-Doublets: A First-Order Assessment of Geothermal SedHeat Systems. Applied Sciences, 11 (2). p. 697. ISSN 2076-3417

Maiga, Aboubacarine (2021) Theoretical Comparative Energy Efficiency Analysis of Dual Axis Solar Tracking Systems. Energy and Power Engineering, 13 (12). pp. 448-482. ISSN 1949-243X

Marymartha, Ugbaja, Chikodiri and Ikeh, C. U. and Egwuonwu, G. N. (2019) Comparative Study of Weekly Discharge Rate of Two Solar Batteries Commonly Used in Anambra State. Journal of Engineering Research and Reports, 6 (2). pp. 1-13. ISSN 2582-2926

Mohankumar, Madhan and Praveen Kumar, S. and Guruprasad, B. and Manavalla, Sreekanth and Isaac JoshuaRamesh Lalvani, Joshua Stephen Chellakumar and Somasundaram, P. L. and Tamilarasu, P. and Tanwar, Prakash Singh and Chelladurai, Samson Jerold Samuel (2021) XRD Peak Profile Analysis of SiC Reinforced Al2O3 Ceramic Composite Synthesized by Electrical Resistance Heating and Microwave Sintering: A Comparison. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Oh, Sebeom and Choi, Gahyun and Lee, Deokhyun and Choi, Myungsik and Kim, Kyungmo (2021) Analysis of Eddy-Current Probe Signals in Steam Generator U-Bend Tubes Using the Finite Element Method. Applied Sciences, 11 (2). p. 696. ISSN 2076-3417

Ostolaza, Marta and Arrizubieta, Jon Iñaki and Lamikiz, Aitzol and Cortina, Magdalena (2021) Functionally Graded AISI 316L and AISI H13 Manufactured by L-DED for Die and Mould Applications. Applied Sciences, 11 (2). p. 771. ISSN 2076-3417

Perpignan, André A. V. and Sampat, Rishikesh and Gangoli Rao, Arvind (2019) Modeling Pollutant Emissions of Flameless Combustion With a Joint CFD and Chemical Reactor Network Approach. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Ping, Gong (2023) Modeling and Simulation of Pure Electric Passenger Vehicle Based on MATLAB and AVL CRUISE. Journal of Engineering Research and Reports, 25 (5). pp. 41-54. ISSN 2582-2926

Qiao, Yujing and Fan, Yuqi and Fernández Fernández, Francisco Javier (2021) A PID Tuning Strategy Based on a Variable Weight Beetle Antennae Search Algorithm for Hydraulic Systems. Advances in Materials Science and Engineering, 2021. pp. 1-19. ISSN 1687-8434

Raji, Nurudeen A. and Adedeji, Kasali A. and Oyetunji, Elkanah O. and Agbelusi, Ayodeji D. (2021) Design Analysis of Bevel Gear for Gearmotor Selection in Revolving Platform. Modern Mechanical Engineering, 11 (01). pp. 1-11. ISSN 2164-0165

Saha, Subrata (2012) A Time History Method for Analysing Operational Piping Vibrations. World Journal of Mechanics, 02 (06). pp. 325-333. ISSN 2160-049X

Sebastine, A. Bam and Michael, Abuh and Kumaden, Ikpambese (2023) Evaluation of the Combustion Characteristics of Rice Husk and Coconut Shell Briquettes. Journal of Engineering Research and Reports, 25 (6). pp. 1-9. ISSN 2582-2926

She, Chenfei and Zhang, Ming and Ge, Yibo and Tang, Liming and Yin, Haifeng and Peng, Gang (2022) Design and Simulation Analysis of an Electromagnetic Damper for Reducing Shimmy in Electrically Actuated Nose Wheel Steering Systems. Aerospace, 9 (2). p. 113. ISSN 2226-4310

Takahashi, Fumiaki (2019) Whole-House Fire Blanket Protection From Wildland-Urban Interface Fires. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Tangsopa, Worapol and Thongsri, Jatuporn (2021) A Dual Frequency Ultrasonic Cleaning Tank Developed by Transient Dynamic Analysis. Applied Sciences, 11 (2). p. 699. ISSN 2076-3417

Voufo, Joseph and Yaou, Zakari and Biyeme, Florent and Djomi, Rolland and Metangmo, Richard Dadji and Tchotang, Théodore (2022) Reducing Greenhouse Gas Emissions through Improving the Life Span of Wooden Power Electric Poles of Eucalyptus saligna. Modern Mechanical Engineering, 12 (01). pp. 1-26. ISSN 2164-0165

Wattanasakulpong, Nuttawit and Ungbhakorn, Variddhi (2012) Free Vibration Analysis of Functionally Graded Beams with General Elastically End Constraints by DTM. World Journal of Mechanics, 02 (06). pp. 297-310. ISSN 2160-049X

Winarso, Rochmad and Ismail, Rifky and Anggoro, Paulus Wisnu and Jamari, Jamari and Bayuseno, Athanasius Priharyoto (2023) A scoping review of the additive manufacturing of mandibular implants. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Witteveen, Wolfgang (2012) On the Modal and Non-Modal Model Reduction of Metallic Structures with Variable Boundary Conditions. World Journal of Mechanics, 02 (06). pp. 311-324. ISSN 2160-049X

Xing, Miaojie and Geng, Lihui and Zhang, Yongli (2024) μ-Synthesis of an Under-Actuated Bridge Crane. Journal of Engineering Research and Reports, 26 (9). pp. 13-29. ISSN 2582-2926

Yamaguchi, Masafumi and Lee, Kan-Hua and Schygulla, Patrick and Dimroth, Frank and Takamoto, Tatsuya and Ozaki, Ryo and Nakamura, Kyotaro and Kojima, Nobuaki and Ohshita, Yoshio (2021) Approaches for High-Efficiency III-V/Si Tandem Solar Cells. Energy and Power Engineering, 13 (12). pp. 413-427. ISSN 1949-243X

Yan, Haotian (2020) Port-Hamiltonian Based Control of the Sun-Earth 3D Circular Restricted Three-Body Problem: Stabilization of the L1 Lagrange Point. Modern Mechanical Engineering, 10 (03). pp. 39-49. ISSN 2164-0165

Yang, Guoping and Chen, Yubao and Chen, Bo (2012) Dynamic Performance Research on Reversing Valve of Hydraulic Breaker. World Journal of Mechanics, 02 (06). pp. 288-296. ISSN 2160-049X

Yu, Baoyang and Sun, Zongguang and Qi, Lin and Manolakos, Dimitrios E. (2021) Freeze-Thaw Splitting Strength Analysis of PAC Based on the Gray-Markov Model. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Zajdel, Albert and Krawczyk, Mariusz and Szczepański, Cezary (2022) Pre-Flight Test Verification of Automatic Stabilization System Using Aircraft Trimming Surfaces. Aerospace, 9 (2). p. 111. ISSN 2226-4310

Zhang, Yu and Liu, Jin and Fan, Te-Jia and Xu, Chen-Yang and Meng, Tian-Yi and Zhao, Yang and Su, An and Yao, Yongsheng (2021) Earth Pressure of Three-Dimensional Stress States under Different Strength Criteria and Its Application. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Zhu, Eryu and Wang, Bin and Wei, Dongqi and Zhu, Li and Gloria, Antonio (2021) Experiment and Numerical Simulation of Wooden Door Frame. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434